AVS Chrome Bug Deflector II
We engineered the Chrome Bug Deflector II to deliver the classic mirror-finish chrome look that complements factory trim while protecting your hood and windshield from road debris. This second-generation deflector uses precision-molded high-impact acrylic with a reflective chrome coating that won't fade or peel over time.
Our signature wrap-around design follows the contour of your hood to channel air up and over the cabin, deflecting bugs, stones, and road grime away from vulnerable painted surfaces. The no-drill mounting system uses OEM-grade automotive tape and custom brackets engineered for your specific year, make, and model, so installation takes about 15 minutes with zero permanent modifications to your vehicle.
Chrome Deflector II specifications
Chrome Finish & Material Construction
The reflective chrome coating on our Bug Deflector II undergoes a multi-stage vacuum metalizing process that bonds the finish directly to the acrylic substrate. This creates a durable mirror surface that won’t flake or peel like spray-on chrome alternatives, even after years of exposure to car washes, salt spray, and UV radiation.
We mold each deflector from 3mm high-impact acrylic rated to withstand temperatures from -40°F to 180°F without warping or cracking. The material maintains its optical clarity and structural integrity through freeze-thaw cycles, making it ideal for year-round use in any climate. The chrome layer itself is protected by a clear topcoat that resists oxidation and chemical staining from bug acids and tar.
Vehicle-Specific Fitment & Installation
We manufacture over 400 vehicle-specific applications of the avs chrome bug deflector ii, each with custom mounting brackets and templates engineered to match your exact hood contour. The deflector arrives with a paper installation template that shows you precisely where to position the mounting points for flush alignment with factory body lines.
Installation requires no drilling, cutting, or permanent modifications to your vehicle. The mounting system uses industrial-strength 3M VHB tape pre-applied to custom ABS plastic brackets that distribute stress across the hood surface. We include isopropyl alcohol prep pads to clean the mounting area and ensure maximum adhesion strength.
Aerodynamic Performance & Protection
The wrap-around profile of our Chrome Bug Deflector II creates a controlled air stream that lifts oncoming debris up and over your windshield rather than letting it impact the glass at full velocity. Wind tunnel testing shows the deflector reduces bug splatter on the windshield by 82% at highway speeds while generating minimal wind noise or drag.
The leading edge features a radiused profile that prevents sharp edges from creating turbulence or whistling sounds above 45 mph. We angle the deflector at 35 degrees relative to the hood surface to optimize lift without creating excessive downforce on the mounting points. This angle also prevents water from pooling on top of the deflector during rain, maintaining clean airflow in all weather conditions.
More AVS Chrome & Smoke Deflectors
Rated 4.8 by verified buyers
Chrome Bug Deflector II Questions
We manufacture over 400 vehicle-specific applications of the avs chrome bug deflector ii covering most trucks, SUVs, and crossovers from 1980 to current model years. Each deflector is precision-molded to match your exact hood contour and includes custom mounting brackets engineered for your vehicle.
To verify fitment, you'll need your vehicle's year, make, model, and sometimes sub-model or bed length for trucks. Our fitment database accounts for mid-year design changes and special editions that affect hood shape. If you're unsure about your application, contact our customer service team with your VIN and we can confirm compatibility before you order.
The 3M VHB automotive tape we use is the same adhesive system OEM manufacturers specify for body cladding, trim pieces, and emblems. It's engineered to maintain full bond strength from -40°F to 180°F and resists degradation from UV exposure, moisture, road salt, and petroleum products.
In real-world testing, deflectors mounted with this tape system remain secure for the life of the vehicle under normal use. The adhesive actually gains strength over the first 72 hours after installation as it fully cures. We've had customers report solid mounting performance after 8+ years and 150,000+ miles with zero re-adhesion required.
Yes, the avs chrome bug deflector ii is designed to withstand both touchless and brush-style automatic car washes once the adhesive has fully cured. We recommend waiting 72 hours after installation before taking the vehicle through a car wash to allow maximum bond strength to develop.
The deflector has been tested in commercial car washes with high-pressure spray nozzles and rotating brushes without any mounting failures. The aerodynamic profile actually reduces wind loading compared to boxier designs, which helps the mounting system handle the forces generated by wash equipment.
No special cleaners are needed. Standard car wash soap and water work perfectly for routine cleaning. The chrome coating is protected by a clear topcoat that resists water spots and chemical staining, so it maintains its shine with the same care you give your vehicle's paint.
For bug splatter or tar, use any automotive bug and tar remover applied to a microfiber cloth. Avoid abrasive polishes, steel wool, or harsh solvents that could scratch the reflective surface. Applying a spray wax or quick detailer every few months helps maintain maximum shine and adds protection against environmental contaminants.
The aerodynamic profile of the Chrome Bug Deflector II is engineered to minimize both wind noise and drag. The radiused leading edge and 35-degree angle create smooth airflow over the hood without generating turbulence or whistling sounds at highway speeds.
Fuel economy impact is negligible for most drivers. Wind tunnel testing shows the deflector creates approximately 0.5% additional drag at 65 mph, which translates to less than 0.1 mpg difference in real-world driving. The protection benefits against windshield and hood damage far outweigh any minor efficiency change.
Our vacuum metalizing process creates a mirror-finish chrome coating that's visually identical to traditional chrome plating. The reflective layer is actual vaporized metal bonded to the acrylic substrate, not a painted or film finish.
The chrome matches the reflectivity and color tone of factory chrome bumpers, grilles, and trim pieces. Side-by-side, you won't see a visual difference between our chrome acrylic and chrome-plated metal components. The advantage of our process is superior durability, since the chrome is protected by a clear topcoat and won't rust or corrode like exposed chrome plating can over time.
Yes, the no-drill mounting system can be removed cleanly if needed. To remove the deflector, unclip it from the mounting brackets, then use a plastic trim tool to gently pry each bracket away from the hood surface. The 3M tape will release from the paint without pulling up clear coat or leaving permanent marks.
Any adhesive residue left on the hood can be removed with isopropyl alcohol or automotive adhesive remover on a microfiber cloth. The tape is designed for strong permanent mounting but releases cleanly when removal force is applied. We recommend warming the brackets slightly with a heat gun or hair dryer to soften the adhesive before removal for easiest release.